Specifications
	Empty Weight	310 lbs
	Gross Weight	625 lbs
	Wing Span	28' 10"
	Wing Area	135 sq. ft
	Engine Size	40-65 hp
	Rate of Climb	800-1100 fpm
	Cruise Speed	55-75 mph
	Stall Speed	28-34 mph
	Vne	100 mph
	Assembly Time For first time builder	200 hrs

 

CGS Hawk "Sport" Single Seat The Hawk "Sport" Single Seat is the "Hot Rod" version of the standard Classic Single Seat. It was first developed to compete in the European World Air Games in 1999.  This competition is held once every two years in different countries. In the last three competitions at the World Games, the Hawk Sport and it's owners have won First Place (two competitions in a row), Second Place, and a Third Place. The Hawk Sport differs from a Classic in several ways.  First, It has a double surface wing with a semi symmetrical airfoil instead of a flat bottomed one like the standard Classic. This is achieved by the addition of lower rib battens on the lower surface of the wing forming the airfoil. This allows the stall speed to remain the same but the top speed to increase. The wing struts are a fully streamlined aluminum extrusion, which doesn’t require the use of jury struts. This allows for less drag and more speed, or you can cruise at the same speed with a lower power setting.  In addition, the gear legs have streamline fairings over the fiberglass gear legs for even more drag reduction. The Sport also incorporates a curved overhead and curved windshield as standard equipment. The curved overhead offers taller pilots an additional 3 " of headroom; enough for tall pilots with helmets. A fiberglass nose cone also reduces drag and offers a sleeker appearance. The Hawk Sport model has the same top speed as the standard single seat Hawk Arrow.

 

BASIC KIT INCLUDES AS STANDARD EQUIPMENT:               Airframe             3 Position Wing Flaps (not flaperons)             3-Axis Control             Full fuselage pilot surround (roll cage)             Heavy duty wings 2 ¼” dia. leading edge, 1 ¾” dia. trailing edge (FACTORY PRE BUILT)             Shoulder Harness and seat belt All control surfaces (FACTORY PRE BUILT) (flaps, ailerons, rudder, vertical stab, horizontal stab, & elevator)             Heavy duty fiber glass landing gear legs (guaranteed against breakage for ten years)             Your choice – tail dragger with steerable tail wheel or tricycle/steerable nosewheel             Larger rear doors         Streamlined struts – aluminum Streamlined landing gear fairings Curved overhead carry through increases head room by 3” Lower Rib battens Fiberglass Nose Cone – Adds 3-4 mph to top speed, provides streamlined appearance Rough terrain wheels - 16" x 6.5" x 6"             5 gallon fuel tank                               Anodized Tubing                                                     BASIC SINGLE PLACE HAWK SPORT KIT                                  (For combining with covering package and engine packages listed below)           $9,107.00

 

COVERING PACKAGE Includes your choice of either 3.8 oz. stabilized dacron covers or dope and fabric kit.  Dacron covers include all control surfaces which are pre-sewn and ready to install, zipper doors, and full fuselage enclosure.  Dope and fabric kit includes ribs, stringers, hard doors, fabric, and glue - everything but paint).  Click here to see available Dacron cloth colors. Covering Package for Single Place Hawk Sport                                                                                                                              $3,078.00

 

ENGINE PACKAGES FOR above CGS Single Place Sport Model: (ENGINE PACKAGE PRICES OFFERED BELOW ARE FOR COMBINING WITH THE ABOVE KIT AND COVERING PACKAGES ONLY).Due to the soaring rate of the Euro against the US Dollar, all Engine packages will be priced at the time written order is received. Please call us for a verbal quote prior to placing your order.

 

Rotax 447 (40 h.p.) Engine Package: Includes engine, IVO two blade prop, throttle assembly, motor mounts, muffler mounts, miscellaneous hardware and brackets                                                                                                                      $4,847.00 Electric Start                                                                                                                                                                                              $   818.00

 

Rotax 503 (50 h.p.) Dual Carb Engine Package: Includes engine, IVO two blade prop, throttle assembly, motor mounts, muffler mounts, miscellaneous hardware and brackets                                                                                                      $5,926.00 Electric Start                                                                                                                                                                                              $   818.00

 

Rotax 582 (65 h.p.) Engine Package: Includes engine, radiator package, IVO three blade prop, electric start, throttle assembly, motor mounts, muffler mounts, miscellaneous hardware and brackets.                                                         $8,816.00

 

 

 

WE ALSO OFFER POWER FIN PROPS –  Call for pricing

 

OPTIONS FOR SINGLE PLACE “SPORT” MODEL
Trim Tab (in cockpit adjustable)	$  90.00
Additional 5 gal. fuel tank (for a total of 10 gals.)	$ 75.00
Brakes, mechanical	$175.00
Brakes, hydraulic O’Brien w/stick mounted master cylinder	$480.00
Brakes, hydraulic Hager w/stick mounted master cylinder, includes Hager wheels	$680.00
Wing/Tail folding Package	$280.00
Hard Doors for Single Place (2 doors) applies only to Dacron orders	$190.00
Folding Tail Only	$170.00

 

Dacron Covers/Options
There is no extra charge for ordering Dacron covers with solid colors. You can mix the solid colors as much as you like. (i.e. red wings, yellow ailerons, yellow flaps, black fuselage, etc.). Stripes and special logos are optional, and a layout diagram needs to be submitted for a quote.  Color samples and layout diagrams are available upon request.
Map case in doors for storing sectionals, etc. (per door – cloth door only)	$   40.00
Tinted Lexan Windows	$ 150.00

 

 

Parachute Systems for Single Place Models (Includes CGS Mounting Package)
BRS 600 (600 lbs.) Softpack	$2,950.00
BRS 600 (600 lbs.) Canister	$3,215.00
BRS 800 (800 lbs.) Softpack	$3,450.00
BRS 800 (800 lbs.) Canister	$3,695.00
Freight for parachute systems	$   108.00

 

 

Special Options
Fast-build kit, requires only 100 hours to complete (for first time builder)	$3,100.00
Special crating for fast-build kit	market
Amphibious and standard Float Systems available.	Write for details
Wing tank kit, 10 gal total (5 gal per side) Includes 2 tanks, hoses, fittings, sump tank, mounting brackets, straps, etc.	$424.00
Wheel pants (pants only), Set of 3	$324.00
Wheel pants (pants only), Set of 2	$216.00
Wheel pants mounting kit	$  45.00

 

 

All domestic kits shipped via truck line are subject to a $400 crating charge per kit. All foreign kits shipments are also subject to the $400 crating charge per kit. Domestic orders which are picked up at the factory are not subject to the crating charge.

.